Acetyl Tributyl Citrate (ATBC)

CAS No.: 77-90-7
Molecular Formula: C20H34O8
Molecular Weight: 402.48
Molecular Structure:

atbc

Property:
ATBC is compatible with polyvinyl butyra, partly compatible with cellulose acetate, cellulose acetate butyrate. The cold resistance and light resistance are similar to those of trinbutyl citrate.

Its water resistance is better. Nontoxic, LD50=4000mg/kg.

Specification:

Item Values
Density 25 ºC g/cm3 1,035 – 1,053
Viscosity 25 ºC cp. 25 – 55
Acidity mg KOH/g  ≤ 0,5
Refraction Index 1,441 – 1,451
Boiling point a 1 mmHg 172 – 174
Steam pressure at 20ºC 5,2 – 10,2
Gardner Color ≤1
Frozen pointºC  – 59
Content of esther % 99
Molecular formula C20H34O8
Content of water %  ≤0,25
Solubility  mg/L 25 º <100

Application:

ATBC is innocuous plasticizer,mainly used as plasticizer of PVC, cellulose resin and synthetic rubber, ATBC is used in innocuous PVC grain, Produce food packaging material, medical products, prepare flavor, essence, soft toys for children and produce cosmetics etc. Also ATBC be used as stabilizer of polyvinylidene chloride etc..

Packing:

200L metal pail
200Kg per pail.

ihiiaigd

Dioctyl Adipate (DOA)

CAS: 123-79-5
Molecular Formula : C22H42O4
Molecular Weight : 370.6
Structural Formula :

bcjjafad

Property:

DOA – is colorless, odorless, transparent oily liquid, It can soluble in organic solvents such as ethanol, aether, acetone and acetic acid, DOA is slightly soluble in glycol, insoluble in water.

Specification:

Item Values
Color (pt-co)  ≤ 20
Content of ester % ≥ 99.5
Density (g/cm3 à 20 ℃) 0.924-0.926
Acidity (mg KOH/g) ≤ 0.07
Weight reduced after heating (125 ℃ 2 hours) % ≤ 0.2
Flash Point (open cup) ℃ ≥ 190



Application :

DOA – 
is a typical freeze-resisting plasticizer used in PVC, chlorethlene polymer, cellulose nitrate, ethyl cellulose and synthetic rubber, for high in plasticizing efficiency, low in color changing property after heating, capable of making products soft in low temperature and light-resisting. When processed, DOA shows fine smoothness and the products are pleasant to touch. DOA can be used together with DOP and DBP in cold-resisting agricultural plastic film, freezing food, packing film, cable, electric wire, imitation paper, planet, outdoor water pipe. While DOA is used in, initial viscosity is low and stable.

However, DOA should be used with care for it has high volatility, and is poor in water-proof, migratory aptitude property and electric insulating property.


Packing:

NW.:180kg-190kg, packed in metal pail or on he clients requirements.

eabbfjja

DOP (di octil ftalato)

CAS: 117-81-7
Molecular Formula: C24H38O44
Molecular Weight: 390.56
Molecular Structure:

iachafgc

Property:

Dioctyl Phthalate (DOP) is corloless or slightly yellow transparent oily liquid, Dioctyl Phthalate (DOP) do not dissolve in water, Dioctyl Phthalate (DOP) can soluble in ethanol, ether, mineral oil, the majority of organic solvents.

Specification:

Appearance Transparent Liquid
Odor Odourless
Purity ≥ 99.5%
Density (20οC), g/cm3 0.983-0.985
Acidity (mg KOH/g)  ≤ 0.07
Water Content %  ≤ 0.1
Color (Pt-Co)  ≤ 40
Refraction Index (20οC) 1.486-1.487
Viscosity (20οC), mPa.s 77-82
Resistivity ×10 9 —-
Absortion UV —-


Usage:

DOP is one of the most extensively used plasticizers in plastics processing. It has comprehensive properties, such as high plasticizing efficiency, low volatility, UV-resisting property, water-extracting proof, cold-resisting property, and also good softness and electric property. As a fine main plasticizer, DOP is extensively used in processing polyvinyl choride and ethylcellulose resins to produce plastic film, imitation leather, electric wire, cable wearer, sheet, planet, mould plastic products and Used in nitrocellulose paints, DOP can make the ethylcellu lose more elastic and stronger in extracting tension. It can be used as a softening agent of synthetic rubber, such as to make the product easier to rebound and harder to undergo form change under pressure, without affecting of the plastics

Packing:

200kg/ Drum

eghffbbj